#----------------------------------------------------------# 
#                                                          # 
#         Type <CE3> FTM-2001 DATA EDITOR HELP FILE        # 
#                                                          # 
#      Copyright (c) 1989/10/05 by YAESU MUSEN Co., Ltd.   # 
#                                                          # 
#----------------------------------------------------------# 
# 
# Help File Format Information 
# 
# Special characters at the beginning of each line determine 
# the function of that line: 
#       `#' = Comment line, ignored by program 
#       `:' = Control line. the program looks for these 
#             lines, and reads the following characters as a 
#             help subject label. One special case is 
#             ":page", which indicates a page break within a  
#             help subject. 
# Maximum line length for help items is 61 chrs. Longer lines 
# are truncated. Maximum number of lines/screen is 16  
# (additional lines are automatically moved to the next  
# screen). 
# 
#----------------------------------------------------------- 
# 
#    COMMON DATA EDIT HELP 
# 
#----------------------------------------------------------- 
# 
#    COMMON DATA SELECT MENU HELP 
# 
#----------------------------------------------------------- 
:com_menu
# 
 Channel Table Selections  
  
     The first five selections in this menu allow you to  
 replace the current data in the four RAM tables with 
 standard data from tables in ROM. Note that ALL data in the 
 selected Table will be replaced. 
     Use the up/down arrow keys to highlight a selection, and 
 press Enter. The first five selections will pop up another 
 window, from which you can make a more specific selection 
 with the up/down keys (or press Esc or F8 to back out). 
     Before any RAM data is actually overwritten, you will be 
 asked to confirm your selection. Press Y to accept, or any 
 other key to cancel and leave the data unchanged. 
 
 Set Table A: Choose a group of channels from one of 15  
              standard channel sets (or disable). 
# 
:page
# 
 Set Table B:      Choose another group from the 15 standard  
                   channel sets (the TEST selection is useful 
                   only at the factory). 
 Set WX Table:     Choose this to either enable or disable    
                   the standard weather channels. 
 Set USA Simp/Dup: Choose this to select either simplex or    
                   duplex USA channels. 
 Copy ROM Table:   This selection allows you to reload any of 
                   the four RAM Tables (A, B, PVT or WX) from 
                   ROM. 
 Data Hex Dump:    Unlike the other choices, this selection 
                   does not present a secondary set of 
                   selections, but shows the current contents 
                   of the channel data memory. The up/down 
                   keys can be used to scroll through memory. 
 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B TABLE CODE SELECT HELP 
# 
#----------------------------------------------------------- 
:com_ab_select
# 
 Table A/B Selections 
 
 Using the up/down keys, highlight one of the 15 standard 
 sets of channels, and then press Enter. You can also choose 
 to disable Table A (if only one channel set is to be pro- 
 grammed in the radio). The TEST selection for Table B is 
 used by the factory, but is not useful in the field. 
 
 Note that Tables A and B must not both be set to the same  
 channel set.  
 
 If you do not want to make any changes, press Esc. Other- 
 wise, you will be warned that current data in RAM will be 
 overwritten by the selected channel data from ROM when you 
 return to the main editing screen.   
 
# 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    WX TABLE ENABLE/DISABLE SELECT HELP 
# 
#----------------------------------------------------------- 
:com_wx_sw
# 
 
 
 
 Weather Channel Selections 
 
 To change the enabled/disabled state of the weather 
 channels, press the up or down arrow key and then Enter. 
 
 If you do not want to make any changes, press Esc. Other- 
 wise, you will be warned that the current data in RAM will 
 be overwritten by the selected channel data from ROM when 
 you return to the main editing screen.   
 
 
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    USA 79CH SIMP/DUP SELECT HELP 
# 
#----------------------------------------------------------- 
:com_usa79
# 
 
 
 
 
 USA Simplex/Duplex Channel Selection 
 
 To change the simplex/duplex state of the USA channels 
 (displayed at the top of the main screen), press the up or 
 down arrow key and then Enter. 
 
 If you do not want to make any changes, press Esc. 
 
 
 
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    CHANNEL TABLE ROM COPY HELP 
# 
#----------------------------------------------------------- 
:com_init
# 
 
 
 Copy Standard Channels from ROM 
 
 This selection allows you to choose one of the four RAM  
 tables (A, B, PVT or WX) to be loaded from the standard  
 channel data in ROM. 
 
 Use the up or down arrow keys to select which table to load, 
 and press Enter. You will be asked to confirm that you want 
 to overwrite the RAM, since any edited changes to the 
 existing channel data will be lost. Press Y to accept, or 
 any other key to abort the change. 
 
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B TABLE EDIT HELP 
# 
#----------------------------------------------------------- 
# 
#    A / B CHANNEL ERASE/UNERASE HELP 
# 
#----------------------------------------------------------- 
:ab_rxf
# 
 Table A/B Channel Enable/Disable 
 
 To enable or disable the selected channel, press the Space
 Bar. Hyphens are displayed in the fields of a disabled
 channel.
 
 To select another channel (row) or field (column), use the 
 arrow keys. The row with the highlighted field is the chan-
 nel currently selected for editing.
 
 With this screen you can modify individual channels of the  
 Table named at the upper left. For Tables A & B, the stan- 
 dard set from which the displayed data originated is shown 
 at the top right. To display another Table (A, B, PVT or 
 WX), press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.
# 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B CHANNEL SIMPLEX/DUPLEX HELP 
# 
#----------------------------------------------------------- 
:ab_rpt
# 
 Table A/B Simplex/Duplex Channel Selection 
 
 To change the simplex/duplex nature of the selected channel, 
 press the Space Bar. The displayed Rx Freq. should change as 
 simplex or duplex is selected. 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 Table named at the upper left. For Tables A & B, the stan- 
 dard set from which the displayed data originated is shown 
 at the top right. To display another Table (A, B, PVT or 
 WX), press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B CHANNEL ENTRY SETTING HELP 
# 
#----------------------------------------------------------- 
:ab_ent
# 
 
 Scan Include/Exclude Setting
 
 To include or exclude this channel when scanning, press the
 Space Bar. "Include" indicates the channel can be scanned.
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 Table named at the upper left. For Tables A & B, the stan- 
 dard set from which the displayed data originated is shown 
 at the top right. To display another Table (A, B, PVT or 
 WX), press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B CHANNEL TX ENABLE/DISABLE HELP 
# 
#----------------------------------------------------------- 
:ab_txf
# 
 Transmitter Enable/Disable Setting 
 
 To enable or disable transmission on this channel, press the 
 Space Bar. "Tx off" indicates transmission is disabled (or 
 else the transmit frequency is displayed). 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 Table named at the upper left. For Tables A & B, the stan- 
 dard set from which the displayed data originated is shown 
 at the top right. To display another Table (A, B, PVT or 
 WX), press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    A / B CHANNEL TX POWER SETTING HELP 
# 
#----------------------------------------------------------- 
:ab_pow
# 
 Transmitter Power Capability Selection 
 
 "Low" here indicates only low transmitter power is available 
 on this channel (despite user setting of the Hi/Low switch). 
 "High" indicates both low and high power are selectable by 
 the Hi/Low switch. Hyphens indicate the transmitter is 
 disabled (from the Tx Freq. field to the left).  
 
 Pressing the Space Bar changes the power capability or 
 enables the transmitter, if disabled. 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 Table named at the upper left. For Tables A & B, the stan- 
# 
:page
# 
 dard set from which the displayed data originated is shown 
 at the top right. To display another Table (A, B, PVT or 
 WX), press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    WX TABLE EDIT HELP 
# 
#----------------------------------------------------------- 
# 
#    WX CHANNEL FIXED NUMBER SETTING HELP 
# 
#----------------------------------------------------------- 
:wx_ch
# 
 Weather Channel Selection/Disable 
 
 You can select the frequency of this weather channel either 
 by entering its (standard) channel number (0 to 159), or  
 just pressing Enter to get a list of available channels. In 
 either case, press Enter again when the desired channel 
 number is displayed in the MemCh field. To disable this 
 WX channel, press the Space Bar (hyphens will display). 
  
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 WX (weather) Table. To display another Table (A, B or PVT), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    WX CHANNEL ERASE/UNERASE HELP 
# 
#----------------------------------------------------------- 
:wx_rxf
# 
 
 Weather Channel Enable/Disable 
 
 To disable this WX channel, press the Space Bar (hyphens 
 display when the channel is disabled). Press the Space Bar 
 again to re-enable this channel. 
  
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 WX (weather) Table. To display another Table (A, B or PVT), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    WX CHANNEL SIMPLEX/DUPLEX HELP 
# 
#----------------------------------------------------------- 
:wx_rpt
# 
 Weather Channel Simplex/Duplex Shift Selection 
 
 To change the simplex/duplex nature of the selected channel, 
 press the Space Bar. The displayed Rx Freq. should change as 
 simplex or duplex is selected. 
 
 CAUTION: Make sure the customer has authority to transmit on 
          a channel before enabling it for duplex operation! 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 WX (weather) Table. To display another Table (A, B or PVT), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    WX CHANNEL ENTRY ENABLE/DISABLE HELP 
# 
#----------------------------------------------------------- 
:wx_ent
# 
 
 Weather Channel Scan Include/Exclude
 
 You can press the Space Bar to include or exclude this 
 channel from WX channel scanning. "Exclude" indicates this
 channel will be excluded from WX channel scanning.  
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 WX (weather) Table. To display another Table (A, B or PVT), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    FIXED CHANNEL LIST SELECT HELP 
# 
#----------------------------------------------------------- 
:sel_mrch
# 
 
 
 
 Channel Frequency Table Selection 
 
 Select the desired channel number/frequency using the up/ 
 down arrow keys, and press Enter. If you change your mind 
 before pressing Enter, you can press Esc to cancel channel 
 selection without any change. 
 
 This window appears when you press Enter in a MemCh field, 
 or if you enter a MemCh number other than 0 - 159. 
 
 
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    FIXED CHANNEL NUMBER INPUT HELP 
# 
#----------------------------------------------------------- 
:edit_mrch
# 
 
 
 
 
 Channel Number Input 
 
 Enter a standard channel number between 0 and 159, and press 
 Enter. You can press Backspace to fix mistakes, and Esc to 
 cancel input without change. If you attempt to enter an out- 
 of-range channel number, you will be presented with a table 
 from which you can select any standard channel. 
 
 
 
 
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL EDIT HELP 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL FREE/FIXED SELECT HELP 
# 
#----------------------------------------------------------- 
:pvt_ch
# 
 Private Channel Number Selection 
 
 You can select a standard frequency for this channel either 
 by entering a standard channel number (0 to 159), or by 
 pressing Enter to get a list of available channels. In 
 either case, press Enter again when the desired channel 
 number is displayed in the MemCh field. To set this channel 
 to a non-standard (open) frequency, press the Space Bar. 
  
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 PVT (private) Table. To display another Table (A, B or WX), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL ERASE/UNERASE & INPUT RX FREQUENCY HELP 
# 
#----------------------------------------------------------- 
:pvt_rxf
# 
 Private Channel Receive Frequency Entry & Channel Disable 
 
 You can use the number keys (and Backspace) to enter a 
 receive frequency between 100 and 199.9875 MHz. Spaces at 
 the right are zero-filled. If not a multiple of 12.5 kHz, 
 your entry will be adjusted to the nearest step when you 
 press Enter (or press Esc before Enter to cancel changes). 
 Any entry in this field will cause the MemCh field to dis- 
 play "open" (even if you enter a standard frequency).  
 
 To disable this channel entirely, just press the Space Bar. 
 The fields of this channel will be filled with hyphens when 
 the channel is disabled.  
 
 To select another channel (row) or field (column) when a 
 frequency (or hyphens) is displayed, use the arrow keys.  
# 
:page
# 
 The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 PVT (private) Table. To display another Table (A, B or WX), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL CTCSS DECODER ON/OFF HELP 
# 
#----------------------------------------------------------- 
:pvt_dec
# 
 Toggle Tone Squelch Decoder, and set CTCSS frequency 
 
 Press the Space Bar to toggle the decoder on/off, or press 
 Enter to display the Tone Select window, from which you may 
 select a frequency with the Arrow Keys (pressing Enter again 
 to accept, or Esc to cancel). 
 
 If you know the CTCSS frequency you want, you can enter it 
 directly with the 0 - 9 and [_] (underscore) keys. When the 
 desired CTCSS frequency is displayed, press Enter to accept. 
 If the frequency was invalid (not among the standard tones), 
 the Tone Select Window will appear as described above, with 
 the nearest valid frequency pre-selected. 
 
 NOTE! if the channel is hidden when you make an entry, it 
 will be unhidden. Edit the Rx Freq. field to hide it again. 
# 
:page
# 
 Arrow Keys: Change field, or select in Tone Select window. 
 Space Bar:  Toggle Decoder on/off (except during selection). 
 0 - 9, [_]: Direct tone freq. entry (leading [_]= low-Q). 
 Backspace:  Delete digit to left during direct entry. 
 Enter Key:  Display Tone Select Window, and accept entry/ 
             selection. 
 Esc Key:    Cancel input or selection. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL SIMPLEX/DUPLEX HELP 
# 
#----------------------------------------------------------- 
:pvt_rpt
# 
 Private Channel Simplex/Duplex Shift Selection 
 
 To change the simplex/duplex nature of the selected channel, 
 press the Space Bar. The displayed Rx Freq. should change as 
 simplex or duplex is selected. 
 
 CAUTION: Make sure the customer has authority to transmit on 
          a channel before enabling it for duplex operation! 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 PVT (private) Table. To display another Table (A, B or WX), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL ENTRY ENABLE/DISABLE HELP 
# 
#----------------------------------------------------------- 
:pvt_ent
# 
 
 Private Channel Scan Include/Exclude
 
 You can press the Space Bar to include or exclude this 
 channel from PVT channel scanning. "Exclude" indicates this
 channel will be excluded from PVT channel scanning.  
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 PVT (private) Table. To display another Table (A, B or WX), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  

 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL TX FREQUENCY & TX ENABLE/DISABLE HELP 
# 
#----------------------------------------------------------- 
:pvt_txf
# 
 Private Channel Transmit Frequency Entry/Disable 
 
 You can use the number keys (and Backspace) to enter a 
 transmit frequency between 100 and 199.9875 MHz. Spaces at 
 the right are zero-filled. If not a multiple of 12.5 kHz, 
 your entry will be adjusted to the nearest step when you 
 press Enter (or press Esc before Enter to cancel changes). 
 Any entry in this field will cause the MemCh field to dis- 
 play "open" (even if you enter a standard frequency).  
 
 To disable transmission on this channel, just press Space. 
 This field (and those to the right of it) will be filled 
 with hyphens when transmission is disabled.  
 
 To select another channel (row) or field (column) when a 
# 
:page
# 
 frequency (or hyphens) is displayed, use the arrow keys.  
 The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 PVT (private) Table. To display another Table (A, B or WX), 
 press Tab, or Shift+Tab to select in reverse order. If 
 you cannot display a Table, press F2 and enable it first.  
 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL CTCSS ENCODER ON/OFF HELP 
# 
#----------------------------------------------------------- 
:pvt_enc
# 
 Toggle Tone Squelch Encoder, and set CTCSS frequency 
 
 Press the Space Bar to toggle the Encoder on/off, or press 
 Enter to display the Tone Select window, from which you may 
 select a frequency with the Arrow Keys (pressing Enter again 
 to accept, or Esc to cancel). 
 
 If you know the CTCSS frequency you want, you can enter it 
 directly with the 0 - 9 and [_] (underscore) keys (entering 
 a number or [_] forces the Encoder on). When the display 
 shows the desired CTCSS frequency, press Enter to accept. 
 If the frequency was invalid (not among the standard tones) 
 the Tone Select Window will appear as mentioned above. 
 
 NOTE! if the channel is hidden when you make an entry, it 
 will be unhidden. Edit the Rx Freq field to hide it again. 
# 
:page
# 
 Arrow Keys: Change field, or select in Tone Select window. 
 Space Bar:  Toggle Encoder on/off (except during selection). 
 0 - 9, [_]: Direct tone freq. entry (leading [_]= low-Q). 
 Backspace:  Delete digit to left during direct entry. 
 Enter Key:  Display Tone Select Window, and accept entry/ 
             selection. 
 Esc Key:    Cancel input or selection. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    PVT CHANNEL TX POWER SETTING HELP 
# 
#----------------------------------------------------------- 
:pvt_pow
# 
 Transmitter Power Capability Selection 
 
 "Low" here indicates only low transmitter power is available 
 on this channel (despite user setting of the Hi/Low switch). 
 "High" indicates both low and high power are selectable by 
 the Hi/Low switch. Hyphens indicate the transmitter is 
 disabled (from the Tx Freq. field to the left).  
 
 Pressing the Space Bar changes the power capability or 
 enables the transmitter, if disabled. 
 
 To select another channel (row) or field (column), use the 
 arrow keys. The selected channel has one field highlighted. 
 
 With this screen you can modify individual channels of the  
 
# 
:page
# 
 
 PVT Table. To display another Table (A, B, or WX), press 
 Tab, or Shift+Tab to select in reverse order. If you cannot 
 display a Table, press F2 and enable it first.  
# 
# 
# 
#----------------------------------------------------------- 
# 
#    CLONE DATA TRANSFER HELP 
# 
#----------------------------------------------------------- 
# 
#    READ CLONE DATA HELP 
# 
#----------------------------------------------------------- 
:read_rom
# 
 Transfer data between PC and Transceiver's Memory 
 
 The Space Bar is used to proceed with the transfer operation 
 after ensuring the hardware is set up for the transfer. 
 To cancel and return to the Channel Editor, press the Esc 
 Key instead. 
 
 The status of the transfer operation will be displayed when 
 finished (a few seconds after pressing the Space Bar). 
 
 NOTE! Press the Esc Key if the system appears to hang. Then 
 make sure the power indicator on the interface box is on, 
 and check the cables for a connection problem. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    SEND CLONE DATA HELP 
# 
#----------------------------------------------------------- 
:write_rom
# 
 Transfer data between PC and Transceiver's Memory 
 
 The Space Bar is used to proceed with the transfer operation 
 after ensuring the hardware is set up for the transfer. 
 To cancel and return to the Channel Editor, press the Esc 
 Key instead. 
 
 The status of the transfer operation will be displayed when 
 finished (a few seconds after pressing the Space Bar). 
 
 NOTE! Press the Esc Key if the system appears to hang. Then 
 make sure the power indicator on the interface box is on, 
 and check the cables for a connection problem. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    FILE SELECTION HELP 
# 
#----------------------------------------------------------- 
# 
#    CURSOR KEYS SELECT FILE HELP 
# 
#----------------------------------------------------------- 
:file_select
# 
 File Selection Window 
  
 Select a filename or subdirectory (upper-case, in angle 
 brackets <>) using the Arrow Keys, and then the Enter Key 
 to accept your selection. If you selected a subdirectory, 
 the window contents will be replaced with that subdirec- 
 tory's contents, from which you can select again. 
  
 You can also enter a new drive letter or filespec directly. 
 Press an alphanumeric key to activate the filespec line edi- 
 tor along the bottom of the window. You can use wildcards 
 ("*" or "?") to display only certain files (default: *.ch). 
 For example, B:\CHDATA\*.ch and Enter displays only files  
 with the "ch" extension in the CHDATA subdirectory on drive 
 B). Tab returns you to the top half of the selection window. 
 
# 
:page
# 
 (at any time in Selection Window) 
 Enter Key:  Accept selection. 
 Esc Key:    Cancel operation and return to Channel Editor. 
 Tab Key:    Switch between Selection Window and line editor. 
  
 (for selection in upper part of window) 
 Arrow Keys: Select filename/subdirectory. 
 Home Key:   Jump to first selection on screen. 
 End Key:    Jump to last selection on screen. 
 PageDown:   Jump down one page (for large directories). 
 PageUp:     Jump up one page (for large directories). 
  
 (for filespec editor at bottom of window) 
 Delete:     Delete character under cursor. 
 Backspace:  Delete character to left. 
 Insert:     Toggle insert/overwrite modes. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    FILE PATH EDIT & INPUT HELP 
# 
#----------------------------------------------------------- 
:path_edit
# 
 File Selection Window 
  
 Select a filename or subdirectory (upper-case, in angle 
 brackets <>) using the Arrow Keys, and then the Enter Key 
 to accept your selection. If you selected a subdirectory, 
 the window contents will be replaced with that subdirec- 
 tory's contents, from which you can select again. 
  
 You can also enter a new drive letter or filespec directly. 
 Press an alphanumeric key to activate the filespec line edi- 
 tor along the bottom of the window. You can use wildcards 
 ("*" or "?") to display only certain files (default: *.ch). 
 For example, B:\CHDATA\*.ch and Enter displays only files  
 with the "ch" extension in the CHDATA subdirectory on drive 
 B). Tab returns you to the top half of the selection window. 
 
# 
:page
# 
 (at any time in Selection Window) 
 Enter Key:  Accept selection. 
 Esc Key:    Cancel operation and return to Channel Editor. 
 Tab Key:    Switch between Selection Window and line editor. 
  
 (for selection in upper part of window) 
 Arrow Keys: Select filename/subdirectory. 
 Home Key:   Jump to first selection on screen. 
 End Key:    Jump to last selection on screen. 
 PageDown:   Jump down one page (for large directories). 
 PageUp:     Jump up one page (for large directories). 
  
 (for filespec editor at bottom of window) 
 Delete:     Delete character under cursor. 
 Backspace:  Delete character to left. 
 Insert:     Toggle insert/overwrite modes. 
# 
# 
# 
#----------------------------------------------------------- 
# 
#    MAKE DIRECTORY HELP 
# 
#----------------------------------------------------------- 
:make_dir
# 
 Make a new subdirectory on current Path
 
 
 Input the name of the new subdirectory (up to 8 characters),
 then press Enter. Press Esc or F8 to cancel if you change
 your mind.
 
 Backspace: Delete character to left of cursor
 Delete:	Delete character above cursor
 Insert:	Toggle Insert/Overwrite mode (Insert is default,
			Overwrite has a block cursor)
 
 
# 
# 
# 

